Medical Imaging

Clean, stable power is a must for the expensive, delicate machinery used for medical imaging applications.

Whether you need a UPS system or power conditioner to protect an entire imaging clinic or single piece of machinery, Staco Energy Products Co. has the products you need for all your X-Ray, CAT scan and MRI power protection needs.

UniStar II and III protect individual units from electrical damage

Ensure the accessibility of your data with uninterruptible power supplies (UPS) from Staco Energy Products Co.

Available in 1 kVA, 2kVA, 3 kVA, 6 kVA and 10 kVA, the UniStar® line of single phase, online uninterruptible power supplies delivers true, high-quality, online power, with low distortion, plus sine-wave output to power any combination of linear and non-linear loads.

In the event of AC input supply failure, an internal audible alarm sounds and the unit continues without interruption to provide safe, clean continuous power from its sealed batteries.

Upon return of AC input supply, the UPS reverts to its double conversion operating mode and automatically recharges the batteries in preparation for the next power disturbance.

The FirstLine UPS gives you Complete Protection, Complete Peace of Mind

The FirstLine UPS provides complete protection for three phase applications, at a low cost and with a small footprint. The FirstLine UPS offers online, double conversion protection from blackouts, brownouts, surges, sags, overvoltages, and transients. It can have 8 minutes or more of internal battery runtime, and virtually unlimited runtime with its optional battery packs.

The TreStar P is the smart choice for applications where continuous power is a MUST!

Protect hardware and data from the ever-present hazards of power disturbances with the TreStar® P Series line of three phase, online uninterruptible power supplies. Unlike other systems, TreStar P provides continuous power to any load, within the power rating of the UPS, with load power factors ranging from 0.8 to 1.0 lagging or leading. With three phase ratings from 125 kVA to 225 kVA, TreStar P units totally isolate the connected load from the AC primary supply, protecting it from voltage sags, spikes, transients, RFI and frequency variations.

If the power goes out, an alarm will sound and the TreStar P will continue to provide safe, clean power without interruption. When the power returns to normal, the TreStar P automatically recharges the batteries in preparation for the next power anomaly.

Reliability begins with design. The TreStar P is designed to meet the power protection needs of today's sensitive electronic and computer loads with:

• Advanced circuitry to prevent unexpected failure
• A front display panel that gives complete access to 15 critical measurements and 33 alarms
• Advanced battery protection and diagnostics that provide the highest level of protection against overheating, deep discharge and low current.
• Remote monitoring with REDDI PC and REDDI SNMP Software and adapters.

Links to product pages:

• FirstLine UPS
• TreStar P
• UniStar II
• UniStar III
• Voltage Regulators